Nov 16, 2022 ご伝言

アルミプロファイル用押出ダイスの熱処理のポイント

1. The heat treatment quality of the aluminum extrusion die directly affects the service life of the extrusion die. The die is hardened by "+" tempering several times to reach the hardness requirements. Quenching is to improve the hardness of the die, and multiple tempering is to improve the toughness of the die and stabilize the internal organization. The hardness value of the die heat treatment is specified as follows: large aluminum extrusion die (F>500mm)、HRC45-48; 中型 (F300~500mm)、HRC47-50; 小型押出ダイ(F<300mm), hrc48-51;="" test="" three="" points="" on="" the="" same="" plane="" of="" a="" set="" of="" molds,="" and="" the="" hardness="" values="" of="" each="" point="" should="" be="" qualified="" within="" the="" specified="">

2. 押出ダイの熱処理​​工程では、次の点に特に注意してください。

a. 押出成形金型の過度の燃焼や過熱を防ぐために、高温部の加熱速度は速く、保持時間は長すぎないようにする必要があります。 過熱した -- 粗大粒、過燃焼 -- 低融点元素と含有物が溶解します。

b. 割れを防ぐために急冷した後、時間内にアルミニウム押出ダイを焼き戻します。

c. 熱処理後、押出ダイスの硬度が不十分または不均一であることが判明した場合は、アニールを行い、プロセスに応じて再度熱処理を行う必要があります(硬度値がHRC35未満の場合、アニールは行われません)。許可され、熱処理は直接行われます);

d. 大型のアルミニウム押出ダイまたは複雑なキャビティを備えた完成したダイの場合、応力低減および焼き戻しプロセスを追加する必要があります(電気機械加工および機械加工応力を排除するため、つまり、熱応力および組織的応力を排除するため)。

e. 金型焼入れ油の温度は? 焼入れ効果を確保するために100度。


お問い合わせを送る

whatsapp

電話

電子メール

引き合い